1. A posture is never purely geometric
A posture is often described as a configuration. A hip angle, a curvature of the back, a position of the head are typical examples. This geometric description is useful, but it only accounts for an instantaneous state. Moreover, it says nothing about how that state is maintained, monitored and corrected.
Maintaining a posture indeed requires continuous work by the nervous system. This work involves three main operations.
- Detecting certain deviations.
- Anticipating the consequences of foreseeable actions or perturbations.
- Adjusting muscle activity accordingly.
A posture is therefore not a simple geometric object frozen in space. It is rather the momentary result of active regulation, itself fed by sensory information.
A direct consequence of this active regulation must be emphasized. The same outward posture, observable from outside, may correspond to different internal distributions. Muscle tensions, supports and joint adjustments can thus vary without the visible posture changing. Conversely, a small visible variation may be accompanied by a marked change in the underlying mechanical or sensory conditions. Visible geometry and the internal organization that produces it are therefore not the same thing.
A regulation that is often unconscious
In fact, this regulation does not necessarily involve conscious deliberation. Most everyday postural adjustments occur without the person being fully aware of them. Here are a few examples.
- Regaining balance after a slight loss of balance.
- Correcting the position of an arm that starts to slip off an armrest.
- Redistributing a support that has become uncomfortable.
Awareness of the exact trigger often remains partial. The continuous nature of this regulation therefore does not depend on its conscious nature. It is work done by the nervous system, not merely deliberate behavior.
It is this informational dimension of posture — and not its geometric description alone — that is the subject of this sub-guide.
2. Several categories of information reach the nervous system
Postural control thus relies on several categories of sensory sources that complement one another. Vision provides information in particular about the position of the body relative to the environment. The vestibular system, for its part, provides information about head accelerations and the gravitational vertical. Proprioception provides information about the position and movement of body segments. Touch, finally, provides information about contacts with support surfaces (Chiba et al., 2016).
In addition, interoceptive information relating to the body’s internal physiological state is added to these sources. Furthermore, sensory endings present in various connective tissues may contribute to several registers of information. This role depends on their location and function; these registers are notably proprioceptive, interoceptive and nociceptive. These endings do not, however, constitute an autonomous sensory modality comparable to vision, the vestibular system or interoception. Their role will be examined with caution in B6.
A plurality of sources, never just one
Indeed, none of these sources is sufficient on its own to account for postural control. Each provides partial information whose value depends on the context and the task.
This chapter does not, however, develop each of these sources. Proprioception is the subject of B3, interoception of B4. Touch and supports are covered in B5, connective tissues in B6. It retains only the general principle: the nervous system never has a single source of information about the state of the body.
3. This information is integrated, not simply added up
Sensory information is not, in fact, processed independently and then simply added up. It is combined by the nervous system to build an estimate of the state of the body. This construction takes into account the respective reliability of each source and the context in which it is produced (Chiba et al., 2016 ; Peterka, 2002).
The term “estimate” is not a figure of speech here. The nervous system does not have a perfectly direct and exhaustive representation of all body positions. It must build this representation from partial, variable and sometimes conflicting signals (Franklin & Wolpert, 2011). Saying that the body is “continuously informed” therefore does not mean that all modalities are permanently active. Their intensity indeed varies from moment to moment. Nor does it mean that the available signals provide a complete or immediately accurate representation of the body.
A reliability that depends on context
Nor is this a simple relay of the peripheral signal towards conscious perception. This integration combines ascending information with contextual elements and with the person’s previous experience. The reliability of a sensory source is not an absolute and constant property. It depends on the task, environmental conditions and its consistency with the other available information. Visual information disturbed by a moving environment thus becomes a less reliable source. The same applies to a support contact that slips unpredictably. The nervous system then tends to weight them differently (Assländer & Peterka, 2014). Conversely, a stable and predictable surface can provide sufficiently reliable proprioceptive and tactile information. This information will then be given greater weight in the estimate of the bodily state. This contribution is never exclusive, however: it remains combined with the other available sources.
How this construction works in detail is not developed here. The same applies to how the nervous system weights the different sources according to their respective reliability. These two points are the subject of B7 and B8.
4. The motor response in turn modifies the available information
The estimate of the bodily state is therefore not an end point. It contributes to the organization of a motor response: a postural adjustment, a shift of gaze, a change of support. This response in turn modifies the mechanical and sensory conditions of the body.
This logic is not linear but circular. Receiving and processing information indeed contributes to action. Action in turn modifies what can be detected. This sensorimotor loop includes both conscious and unconscious processing. It therefore cannot be reduced to a chain of deliberate perceptions. A shift of the pelvis modifies contact areas, pressures and muscle tensions. It thus produces new information, which will in turn be integrated. This perception–action loop is central: movement is a means of exploration within it, not a mere consequence of perception. It is the subject of chapter B9.
A loop, not a one-off reaction
The body therefore does not simply occupy a position: it continuously evaluates it. This evaluation is in turn modified by what the body does. The resulting stability is not the same as an absence of movement. It refers rather to the ability to maintain or regain an organization compatible with the task. This ability operates despite internal and external variations and those produced by the action itself.
This circularity consequently has a methodological implication for reading this guide. An isolated sensory mechanism cannot be interpreted independently of its motor consequences. Nor can a motor response be interpreted independently of the sensory information that preceded it. It also contributes, in turn, to producing that information. Each following chapter sometimes isolates a particular source of information or mechanism in order to describe it more clearly. It must nevertheless be read in the light of this overall loop.
5. The seat is part of this loop
First, a seat performs a mechanical function. It supports part of the body’s weight, distributes loads and limits certain movements. This mechanical role is not, however, sufficient on its own to fully describe its place in the loop described above. The seat is indeed also a sensory interface. Its mechanical characteriztics influence the contacts, deformations and variations to which the person is exposed. The nature and consequences of this information depend, however, on the support and the person. They also depend on the task and the duration of exposure. This point will be clarified progressively in the following chapters, particularly B2, B5 and B12.
Mechanical support and sensory interface are therefore not opposed. These two functions coexist in every seating support, whatever its design. This sub-guide examines more particularly the second, which is generally less immediately visible than the first. It is, however, just as involved in the perception–action loop described in this chapter.
Thus, when the same support configuration is maintained with few variations, the renewal of certain information may decrease. This concerns in particular information associated with changes in pressure, slipping and movements. Other components of sensory activity may nevertheless persist; this distinction will be developed in B11. Symmetrically, a seat that allows controllable changes of configuration can modify and renew certain mechanical and sensory conditions. How these variations are actually exploited by the person depends, however, on the task and the support. This possibility therefore does not yet presume any specific clinical benefit.
6. What this guide will develop
The Sensory Flows sub-guide follows this general progression over eleven further chapters, according to the following common thread.
- B2 clarifies the chain from mechanical stimulus to nerve signal.
- B3 and B4 then describe proprioception and interoception respectively.
- B5 and B6 for their part, deal with the information provided by contact and by innervated connective tissues.
- B7 also explains how the nervous system builds a representation of the body from these signals.
- B8 returns to postural control and the weighting of the different sensory sources.
- B9 develops the perception–action loop already introduced here.
- B10 also distinguishes nociceptionNociceptionNociception is the process by which the nervous system detects and encodes stimuli that are potentially damaging to tissues. It is not the same as pain, which is an experience.Read the full entry : Nociception from pain.
- B11 deals with the sensory consequences of maintaining the same configuration for a prolonged period.
- B12, finally, applies this whole journey to dynamic sitting.
This chapter does not develop any of these points in detail. It only sets out the cross-cutting principle that links them; each following chapter then clarifies it in a particular area.
7. Key points
- A posture is not a simple geometric configuration: it is the provisional result of active regulation, fed by sensory information.
- The same visible geometry can thus conceal different internal organizations.
- The nervous system indeed draws on several categories of complementary information: visual, vestibular, proprioceptive, tactile and interoceptive.
- Added to this is the non-autonomous contribution of endings present in connective tissues.
- This information is integrated, not simply added up.
- The nervous system thus builds an estimate from partial and weighted signals.
- It is not a direct and exhaustive reading of the state of the body.
- The resulting motor response in turn modifies the available information. Perception and action thus form a continuous sensorimotor loop, including both conscious and unconscious processing.
- Finally, a seat is part of this loop as a mechanical and sensory interface.
- This does not yet presume any specific clinical benefit, however.
The founding principle of this sub-guide can be formulated as follows: the body does not simply occupy a position. It continuously evaluates this position and its consequences so that it can modify it. The following chapters clarify, one after another, how this evaluation is built and what information contributes to it. Finally, they show what it implies for the analysis of a seat.
However, this general principle does not yet allow us to conclude that a dynamic seat automatically corrects posture. Nor does it allow us to claim that it necessarily improves health or systematically reduces pain. This principle merely provides a framework for understanding the mechanisms involved. The exact scope of each of them, as applied to sitting, will be clarified and qualified chapter by chapter.
Scientific references
Multisensory integration and postural control
- Chiba, R., Takakusaki, K., Ota, J., Yozu, A., & Haga, N. (2016). Human upright posture control models based on multisensory inputs; in fast and slow dynamics. Neuroscience Research, 104, 96–104. https://doi.org/10.1016/j.neures.2015.12.002
- Peterka, R. J. (2002). Sensorimotor integration in human postural control. Journal of Neurophysiology, 88(3), 1097–1118. https://doi.org/10.1152/jn.2002.88.3.1097
Sensory weighting and reweighting
- Assländer, L., & Peterka, R. J. (2014). Sensory reweighting dynamics in human postural control. Journal of Neurophysiology, 111(9), 1852–1864. https://doi.org/10.1152/jn.00669.2013
Estimation of bodily state and sensorimotor control
- Franklin, D. W., & Wolpert, D. M. (2011). Computational mechanisms of sensorimotor control. Neuron, 72(3), 425–442. https://doi.org/10.1016/j.neuron.2011.10.006
Proprioceptive contribution to postural control
- Allum, J. H. J., Bloem, B. R., Carpenter, M. G., Hulliger, M., & Hadders-Algra, M. (1998). Proprioceptive control of posture: a review of new concepts. Gait & Posture, 8(3), 214–242. https://doi.org/10.1016/S0966-6362(98)00027-7
